Discover the benefits of purified water with our sources
SAO JAO
It was the first source on the market. We have been working with the original
since 1947, it has been present in at least three generations.
generations. All the affinity that the public has for the Filtro São
João Filter is due to its unquestionable quality, durability and economy
that have accompanied it since its birth.
Available models:
-
8 L, two filters.
-
10 L, three filters.
VENEZA
Within the modern look, the Veneza fountain brings more than 70 years of the recognised effectiveness of the most traditional water purification system on the market, the São João filter.
The Veneza fountain has a modern and sober design that combines a resistant plastic container (bisphenol free) on the top, with the traditional waterproof clay base, which keeps the water fresh and natural.
A model that matches all environments, ideal for those who want clean, crystal clear and healthy drinking water at home.
Available models:
-
6 L, one filter.
-
8 L, two filters.
GLAZED TERRACOTTA
The fruit of the meeting of two continents, the Franco-Brazilian filtering fountain is mainly composed of two terracotta pots, a high-performance Brazilian water filtration system and a base made of french chestnut (an rot-proof wood).
Our fountains are an economical way to ensure healthy, filtered water at home or in the office. This system can only be used with cold drinking water.
-
As with all our other fountains, the valve is made of bisphenol-free plastic.
-
Chestnut wood rot-proof base (optional).
-
Stainless steel tap.
-
Ceramic lid.
-
Capacity: (upper tank) 4,5 L - 3,2 L (lower tank).
-
Height with stand: 42cm
-
Height without stand: 31 cm
-
Diameter: 23 cm
-
Weight: 7,2 kg
-
Number of filters: 1
GRES
TURQUOISE BLUE GLAZED STONEWARE (IMAGE 1)
OFF-WHITE GLAZED STONEWARE (IMAGE 2)
SALT-GLAZED STONEWARE (IMAGE 3)
They are made of sandstone. Sandstone is a clay containing silica sand, fired at more than 1,200 degrees Celsius. Stoneware is very strong and airtight.
They are ideal for storing liquids and very resistant against chemical attacks.
The "chocolate" fountain is made of salted stoneware. At over 1200°C, the silica contained in the clay vitrifies. Noron pottery is in red salted stoneware. This means that the salt is thrown into the kiln when it reaches about 1250°. The salt is then sublimated in hydrochloric acid, forming a more or less matt chocolate shell.
This age-old technique makes the pottery completely waterproof, without the need for glaze. Handcrafted, living and authentic sources that reconnect us with the history of humanity, with the Earth.
-
Capacity: 4,7 L - 2,4 L
-
Height with stand: 45cm
-
Height without stand: 34 cm
-
Diameter: 23 cm
-
Weight: 7,2 kg
-
Number of filters: 1
FLEX
BISPHENOL A, S and F free water fontain.
The Flex Water Fountain, in addition to being lightweight and easy to maintain, is an economical way to ensure healthy, filtered water at home or in the office.
This system can only be used with cold drinking water.
Naturally pure water Reduces impurities in water - Economical water filter - Durability and quality - Environmentally friendly water filter.
-
Capacity: 5 litres in the upper tank - 2.5 litres in the lower tank.
-
Number of filters: 1
-
Height: 46 cm
-
Diameter: 23 cm
-
Height between base and tap: 12 cm
178€ -20% = 142'40€(Igic incluido)
Incluidos:
Un grifo, una válvula y un filtro
Fountain maintenance
Our long-lasting system has a modern design and neutral colours, allowing it to fit into various areas of the home.
There are several models, from 4 to 16 litres, with identical components and mountings.
The system contains an overflow valve that doubles the capacity of the filter, is fully tested, is very effective against bacteria, certain heavy metals, water impurities, chlorine, etc.
It is very easy to use: it is enough to fill the fountain filter with tap water as it does not need any electrical connection.
The tanks should be rinsed with plenty of water before using them for the first time.
For proper cleaning...
Clean the outside of the fountain every week with a damp microfibre cloth. Do not use any product, ONLY WATER. Every 15 to 20 days, wash the inside of the fountain with a soft brush without hitting the filter cartridge. Clean the valve and the tap with white vinegar.
Terracotta is a living, natural material that has its advantages and disadvantages: A new filter in terracotta or terracotta versus plastic will produce a characteristic taste that will gradually disappear if you drain your fountain completely every day for the first few weeks.
White marks may appear on the fountain due to crystallisation of the elements contained in the water, this is a normal reaction. It is therefore advisable to clean the fountain with a damp cloth every 2 or 3 days.
Assembling the Fonts and Tips for their use
Tips for the use of the source:
The filter cartridge should be changed every three to six months (depending on your consumption), depending on the hardness and quality of the water. As mentioned above, they can filter up to 500 litres of water on their own.
According to the results of several laboratories, all of which conform to international standards, the filtration system of our fountains is currently one of the most efficient of all domestic filters on the market.
For hygienic reasons, it is also advisable to change the tap and valve regularly, preferably at the same time as the filter cartridge.
If you notice a reduction in the filtration rate, you can gently brush the filter cartridge under clean water.
Use only filter cartridges from "La Fuente de Salud Canarias".
We advise you to avoid leaving the filter in direct sunlight, as this will increase the evaporation of the water, and also to keep it away from very humid places, as this will hinder transpiration.
This system is designed for temperatures between 5 °C and 45 °C. This system is only suitable for drinking water. It can only filter cold water.
Never place the fountain on a wooden or organic surface. Place it on a waterproof dish or tray.
For models containing more than one filter cartridge, remember to orient the floats as far inwards as possible so that they do not come into contact with the edges of the fountain.
Assembly:
1 - Attach the filter cartridge to the upper tank. Do not over-tighten the cartridge. To do this, hold the cartridge by its plastic base.
2 - Attach the overflow valve to the cartridge under the lower tank. Place washers on each side and tighten them with a nut. Check the tightness of the system.
3 - Attach the tap to the lower tank. Place washers on each side of the wall and tighten with a nut. Check the tightness of the system.
4 - Place the upper tank on top of the lower tank and your filter is ready.
It is advisable to discard the first volume of filtered water equal to the volume of the tank: it may contain some harmless particles of activated carbon.
Operation of the Fountains
How does it work?
The top part stores the water that will be filtered by the force of gravity, slowly, drop by drop. With the slowness and pressure, the water passes through the porous walls of the filter, which manages to hold particles down to 1 micron (1 millionth of a metre), ensuring that most of the contaminants and bacteria do not go down into the lower compartment.
